Hawk RV Instantaneous LP Gas Water Heater - Black Door
Water Heating Capacity: 8L/Min
The water heater is simple and convenient to operate. The microcomputer intelligent control system controls the whole process of the water heater. Press the key to start the water heater and set the required temperature. After the microcomputer intelligent control system detects the qualified water flow, it starts the ignition device. After that, the gas valve is turned on to light the gas burner, and then the user can enjoy a steady stream of constant temperature hot water. The microcomputer automatically detects the entire process, safely and reliably. In case of failure, the microcomputer system will automatically shut down the gas to prevent accidents. The water heater is a forced exhaust system. After the water heater is turned on, the air outside will pass through the air intake grill, enter the combustion chamber after the dust-proof net, and the flue gas or air mixture is discharged outdoors.
1. Digital constant temperature system: microcomputer control system, which constitutes the "computer" of the whole heater, controls the water, electricity, and gas of the water heater in a coordinated manner, and controls the output water temperature to the selected temperature.
2. Low water pressure startup: Low water pressure at startup and it will be easier to use.
3. Flameout protection: When the water heater accidentally flames out during use, it can automatically cut off the gas to ensure that the gas will not leak.
4. Speed changing and wind resistance function: When there is a blockage of the flue or the exhaust is blocked, the built-in microcomputer system will increase the running speed of the fan and eliminate the generation of harmful gases. When the speed reaches the predetermined maximum speed, the microcomputer system will issue the cease-gas and cease-fire instruction to effectively safeguard the heater and occupants.
5. Water and gas linkage control: When the water supply is interrupted or the water outlet valve is closed, the water heater will automatically stop the combustion and shut down.
6. Outlet water temperature display: with outlet water temperature display.
7. Frost protection function: When the temperature of the water pipe in the water heater is lower than 6±1℃ (43°F±2°F), the line controller will display “Fd” character, the machine will start ignition and run with a certain load, the water heater will automatically shut down after the whole machine runs for 5 seconds. When the water temperature in the working water heater reaches 32±1℃ (90°F±2°F), it will shut down automatically.
- After shutdown, wait for 3 minutes for self-testing. When the temperature is lower than 6±1℃ (43°F±2°F) or antifreeze thermostat control stops working, it will start to run again.
- In the process of starting the antifreeze function, when a fault occurs, the corresponding fault is reported and the corresponding code is displayed. After 15 minutes, the system automatically clears the fault code. If the antifreeze start condition is still met, the antifreeze will automatically start again.
8. Fault auto-diagnosis and fault code display function: The intelligent microcomputer can inreal-time monitor various safety devices; gas proportional valves and other components; find faults and if necessary, safely shutdown. Advanced fault code display function, is easy to use and maintain.
|
